MELFA-3D
Vision
Small and light
·
Small and light
(Camera head part: 146 x 87 x 137mm, approx. 0.9 kg)
·
It can be used for
eye-in-hand and can be fixed.
High-speed and high-accuracy measurement
·
This sensor enables
high-speed recognition of 1.2 seconds at the earliest (model-less recognition)
and high-accuracy measurements.
·
The minimum measuring
error of approximately 0.3 mm.
As a replacement for part feeders
One of the following two recognition methods
can be selected.
·
Model-less
recognition: The position of a workpiece is recognized without registering its
model.
·
Model matching
recognition: The pose of a workpiece is recognized using a 3D-CAD model.
·
This sensor is more
inexpensive and conserves a smaller footprint than a part feeder (when multiple
parts are used). Retry operation can reduce stoppage.
Good connection compatibility
Good connection compatibility supplied as a
robot manufacturer
·
This sensor can be
connected directly via LAN equipped with a controller as standard.
·
The sensor can be set
and its operation can be checked easily using a personal computer for setting.
·
When the sensor is
running, the personal computer is not required.
·
The sensor has the
coordinate calibration function of robots and vision sensors as standard
installation.
·
The dedicated commands
added to MELFA-BASIC V can be used to control the sensor.
Product configuration
Products prepared by
customers
Name |
Description |
Quantity |
Personal computer
for setting |
RT ToolBox2 |
1 |
LAN cable |
Category 5e or later |
2 |